With the continuous improvement of the characteristics of the die-cutting machine at this stage, the mold capping machine has been widely used in the manufacturing industry, resulting in the increase of production, because the film cutting process is a common processing process for packaging and printing materials. It uses the film cutter to form the film cutting plate according to the sample drawing specified by the design product. Under the effect of working pressure, The forming process of rolling and cutting printed matter or other ring blank into the desired shape or cut mark. Molding capping machine and die-cutting machine use steel knife, hardware mold and steel wire to release a certain working pressure according to the printing plate to roll and cut the printed matter or cardboard into a certain shape.
If all printed matter is pressed and cut into separate pattern goods, it is called film cutting; If you use steel wire to press out an impression or leave a curved groove mark on the printed matter, it is called embossing; If two templates of Yang and Yin are used, according to heating the abrasives to a certain temperature, the pattern design or font style with three-dimensional practical effect can be hot printed on the surface of the printed matter, which is called hot stamping; If you use one kind of plate to compound on another kind of plate, it is called catering. Therefore, you must select the appropriate machinery and equipment according to the specific situation, so as to ensure that there are no problems in production and manufacturing.
During the operation of the die-cutting machine, a series of operation specifications must be followed. Before the operation, the first inspection record must be filled in. Thirty minutes before the operation, the continuous sampling inspection shall be carried out on the goods. During the whole process of sampling inspection, the problems shall be found continuously, the root causes of difficulties shall be solved, and the review records shall be filled in. During all normal operation, the goods shall be further sampled and inspected at each feeding time. The warped tablet computer, Adjust the speed of the machine and equipment to the appropriate paper feeding rate to prevent safety risks.